What’s Checked at the Excavation Site After an Oil Tank Comes Out?
Removing an underground oil tank
is only part of the job. Once the tank is out of the ground, the excavation
site needs to be carefully inspected to determine whether the surrounding soil
shows signs of a petroleum release. In New Jersey, this post-removal inspection
can include visual observations, field screening, and soil sampling based on
site conditions and applicable requirements.
What Is Checked After an Oil Tank Is Removed?
After an underground oil tank is
removed, professionals typically examine the excavation area for evidence that
oil may have escaped into the surrounding soil. The inspection focuses on the
tank footprint, excavation floor, sidewalls, and nearby soil that may have been
affected.
Common things checked include:
– Soil discoloration or unusual
staining
-Petroleum odors
-Evidence of free or residual
product
-Field screening readings
-The condition of the tank and
associated piping
-Groundwater, if encountered
-Areas where contamination may be
more likely
NJDEP guidance indicates that
sampling locations should be selected based on evidence such as elevated
field-screening readings or visual staining when those conditions are present.
Why Is the Excavation Area Inspected?
The purpose of the inspection is
to determine whether the former tank location has evidence of a discharge. A
tank can be removed successfully while contamination remains in the soil
beneath or around the former tank location.
For New Jersey property owners,
identifying a potential release early can help determine whether additional
investigation or remediation is necessary. NJDEP explains that signs of a
discharge can include visual or odor observations, field screening, or
laboratory analysis indicating contamination in soil or groundwater near the
tank.
How Is Soil Checked After Tank Removal?
Soil sampling is an important
part of evaluating an excavation after an underground oil tank is removed. The
exact sampling approach depends on factors such as tank size, excavation
conditions, groundwater, bedrock, and evidence of contamination.
For certain UST removal
situations where groundwater is not encountered, NJDEP technical guidance
describes collecting samples along the tank footprint, including the soil
immediately below the former tank location. Sampling locations may also be
biased toward areas showing staining or elevated field-screening results.
If the excavation is enlarged,
additional sampling may be required. This helps provide a better understanding
of whether petroleum-related impacts extend beyond the original excavation
area.
What If Groundwater Is Found?
Groundwater conditions can change
the investigation process. If groundwater is encountered in the excavation,
additional groundwater-related evaluation may be necessary depending on the
circumstances.
NJDEP states that a groundwater
investigation may be required when the excavation or tank system is
sufficiently close to groundwater or bedrock under applicable heating-oil-tank
remediation requirements.
This is one reason an excavation
should not simply be backfilled immediately after the tank is removed. Site
conditions should be evaluated first so that appropriate sampling and
documentation can be completed.
What Happens If Soil Contamination Is Found?
If inspection or laboratory
testing identifies a petroleum discharge, additional investigation or
remediation may be required. For residential unregulated heating oil tanks,
NJDEP advises property owners to report a confirmed discharge and work with
appropriately qualified environmental professionals.
The next steps can vary depending
on the type and extent of contamination. They may include additional soil
sampling, groundwater investigation, removal of impacted soil, or other
remediation measures.
NJDEP also notes that remediation
of a leaking unregulated heating oil tank must be handled by an appropriately
qualified subsurface evaluator or Licensed Site Remediation Professional,
depending on the work being performed.
Can the Excavation Be Backfilled Immediately?
Not necessarily. Before
backfilling, the excavation should be evaluated and required samples collected.
The timing and scope depend on the specific site and applicable requirements.
Once the necessary inspection and
sampling activities are completed, the excavation can be prepared for
backfilling using suitable material and appropriate procedures. NJDEP project
specifications also describe post-excavation soil sampling and analysis following
UST removal.
Why Does This Matter for New Jersey Property Owners?
An underground oil
tank removal does more than eliminate an old
tank from a property. The excavation provides an opportunity to determine
whether the tank or piping affected the surrounding environment.
For homeowners in New Jersey,
proper post-removal inspection can help identify potential soil or groundwater
concerns before the excavation is closed. If contamination is discovered,
addressing it through the appropriate investigation and remediation process can
help protect the property and support proper environmental documentation.
Frequently Asked Questions
Q1. What is checked after an oil tank is removed?
The excavation is checked for
staining, petroleum odors, free or residual product, field-screening
indications, and other evidence of a potential discharge. Soil and groundwater
may also be sampled when required.
Q2. Is soil sampling required after every oil tank removal in New Jersey?
Sampling requirements depend on
the tank, excavation, site conditions, and whether a discharge is identified.
NJDEP guidance provides specific sampling approaches for different UST removal
situations.
Q3. What happens if oil contamination is found?
A confirmed discharge can require
reporting, additional investigation, and potentially soil or groundwater
remediation. The appropriate environmental professional should determine the
next steps based on site conditions.
Q4. How many soil samples are needed?
The number and locations of
samples depend on the excavation and applicable requirements. For certain
residential heating-oil-tank discharges, NJDEP states that at least five soil
samples may be required, with the actual number depending on excavation size.
Q5. Why is the excavation inspected before backfilling?
Inspection and sampling help
determine whether petroleum contamination is present. Completing this
evaluation before backfilling can prevent important evidence and sampling locations
from becoming inaccessible.
Final Thoughts
Checking the excavation after an
oil tank comes out is an important step in understanding the condition of the
property beneath the surface. Careful inspection, appropriate soil sampling,
and proper follow-up can help New Jersey property owners address potential
environmental concerns correctly.
If you need professional guidance
with oil tank removal, excavation inspection, or related environmental
services, Simple Tank Services can help you understand the next steps for your property.

Comments
Post a Comment